R-KEX II with Threaded Rods

Premium pure epoxy resin approved for use in cracked and non-cracked concrete

Features and benefits

  • Approved for use with threaded rods for use in cracked and non-cracked concrete (EAD 330499-01-0601), working life up to 100 years df
  • The strongest resin in the epoxy resin class
  • Suitable for use in dry and wet substrates including flooded holes (use category I1 & I2)
  • Seismic category C1, C2
  • Installation direction D3 (downward and horizontal and upwards installation)
  • Minimal shrinkage provides option of use in diamond-drilled holes and oversized holes
  • Very high chemical resistance – suitable for applications exposed to influence of various agents (industrial or marine environment)
  • Extended working time ensures easy installation of metal components (up to 30 min. in 20°C)
  • For use in positive temperatures
  • Diamond and hammer drilling

Base material

  • Cracked concrete C20/25-C50/60

    Cracked concrete C20/25-C50/60

  • Non-cracked concrete C20/25-C50/60

    Non-cracked concrete C20/25-C50/60

Applications

  • Safety barriers
  • Formwork support systems
  • Structural steelwork
  • Street lamps
  • Curtain walling
  • Racking systems
  • Balustrading
  • Barriers
  • Cladding restraints
  • Masonry support
  • Heavy machinery
  • Platforms

Installation guide

Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
  1. Drill hole to the required diameter and depth for stud size being used.
  2. Clean the hole thoroughly with brush and hand pump at least four times before installation.
  3. Insert cartridge into gun and attach nozzle.
  4. Dispense to waste until even colour is obtained.
  5. Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
  6. Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
  7. Attach fixture and tighten the nut to the required torque.

Product information

Product Code

Resin

Description / Resin Type

Volume

[ml]

R-KEX-II-385

R-KEX II

Epoxy Resin

385

R-KEX-II-600

R-KEX II

Epoxy Resin

600

R-STUDS

Size

Product Code

Anchor

Fixture

Steel class 5.8

Steel class 8.8

Steel grade A4

Diameter

Length

Hole diameter

Max. thickness tfix for:

d

L

df

hnom,min

hnom, 12d

[mm]

[mm]

[mm]

[mm]

[mm]

M8

R-STUDS-08110

R-STUDS-08110-88

R-STUDS-08110-A4

8

110

9

40

4

R-STUDS-08160

-

R-STUDS-08160-A4

8

160

9

90

54

M10

R-STUDS-10130

R-STUDS-10130-88

R-STUDS-10130-A4

10

130

12

48

-

R-STUDS-10170

-

-

10

170

12

88

38

R-STUDS-10190

-

-

10

190

12

108

58

M12

R-STUDS-12160

R-STUDS-12160-88

R-STUDS-12160-A4

12

160

14

65

1

R-STUDS-12190

-

R-STUDS-12190-A4

12

190

14

95

31

R-STUDS-12220

-

-

12

220

14

145

61

R-STUDS-12260

-

-

12

260

14

165

101

R-STUDS-12300

R-STUDS-12300-88

R-STUDS-12300-A4

12

300

14

205

141

M16

R-STUDS-16190

R-STUDS-16190-88

R-STUDS-16190-A4

16

190

18

71

-

R-STUDS-16220

R-STUDS-16220-88

-

16

220

18

101

9

R-STUDS-16260

-

-

16

260

18

141

49

R-STUDS-16300

-

-

16

300

18

181

89

R-STUDS-16380

-

-

16

380

18

261

169

M20

R-STUDS-20260

R-STUDS-20260-88

R-STUDS-20260-A4

20

260

22

117

-

R-STUDS-20300

R-STUDS-20300-88

-

20

300

22

157

37

R-STUDS-20350

-

-

20

350

22

207

87

R-STUDS-20220-HDG

R-STUDS-20220-88

-

20

220

22

77

-

R-STUDS-20270-HDG

-

-

20

270

22

-

-

M24

R-STUDS-24300

R-STUDS-24300-88

R-STUDS-24300-A4

24

300

26

132

-

M30

R-STUDS-30380

R-STUDS-30380-88

-

30

380

32

181

-

Installation data

R-STUDS

Size

M8

M10

M12

M16

M20

M24

M30

Thread diameter

d

[mm]

8

10

12

16

20

24

30

Hole diameter in substrate

d0

[mm]

10

12

14

18

24

28

35

Hole diameter in fixture

df

[mm]

9

12

14

18

22

26

33

Min. hole depth in substrate

h0

[mm]

hnom + 5

hnom + 5

hnom + 5

hnom + 5

hnom + 5

hnom + 5

hnom + 5

Min. substrate thickness

hmin

[mm]

hnom + 30 ≥ 100

hnom + 30 ≥ 100

hnom + 30 ≥ 100

hnom + 2d0

hnom + 2d0

hnom + 2d0

hnom + 2d0

Installation torque

Tinst

[Nm]

10

20

40

80

120

180

200

Min. spacing

smin

[mm]

40

40

40

50

60

70

85

Min. edge distance

cmin

[mm]

40

40

40

50

60

70

85

MINIMUM EMBEDMENT DEPTH

Min. installation depth

hnom,min

[mm]

60

70

80

100

120

140

165

MAXIMUM EMBEDMENT DEPTH

Min. installation depth

hnom, max

[mm]

160

200

240

320

400

480

600

Minimum working and curing time

Resin temperature

Concrete temperature

Curing time*

Working time

[°C]

[°C]

[min]

[min]

5

5

2880

150

10

10

1080

120

20

20

480

35

25

30

300

12

Downloads

Need documents for other product? Visit our Technical Library.

go to library

Associated products

  • R-STUDS Metric Threaded Rods - Steel Class A4

    R-STUDS Metric Threaded Rods - Steel Class A4

  • R-NOZ-P Dosing Plug

    R-NOZ-P Dosing Plug

  • R-STUDS Metric Threaded Rods - Steel Class A4, Flat Head

    R-STUDS Metric Threaded Rods - Steel Class A4, Flat Head

  • R-NOZ-KEX-II Mixer nozzle for R-KEX-II

    R-NOZ-KEX-II Mixer nozzle for R-KEX-II

  • RT-MAXH Hollow drill bits Dustlessdrill SDS max

    RT-MAXH Hollow drill bits Dustlessdrill SDS max

  • RT-SDSR Drill bits Rebardrill SDS plus

    RT-SDSR Drill bits Rebardrill SDS plus

  • R-STUDS Metric Threaded Rods - Steel Class 8.8

    R-STUDS Metric Threaded Rods - Steel Class 8.8

  • R-BLOWPUMP Blow Pump

    R-BLOWPUMP Blow Pump

  • RT-SDSH Hollow drill bits Dustlessdrill SDS plus

    RT-SDSH Hollow drill bits Dustlessdrill SDS plus

  • R-STUDS Metric Threaded Rods - Steel Class 5.8

    R-STUDS Metric Threaded Rods - Steel Class 5.8

  • R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head

    R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head

  • RT-MAXT Turbodrill SDS MAX

    RT-MAXT Turbodrill SDS MAX

  • R-BRUSH for Automatic Cleaning System

    R-BRUSH for Automatic Cleaning System

  • R-BRUSH Manual Cleaning System

    R-BRUSH Manual Cleaning System

Need more information about this product? Visit www.rawlplug.com

go to brand site
  • ce
  • iso 9001
  • ISO 4001
  • isots16949
  • ohsas 18001
  • tuv