R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized, Flat Head
Threaded rod 5.8 grade steel, hot-dip galvanized (HDG) with increased corrosion resistance, for use with bonded anchors
Features and benefits
- Threaded rod made of hot dip galvanized steel is suitable for outdoor use and in damp conditions
- High-performance bonded anchors offer high load-bearing capacities
- Suitable for use with special mesh sleeves in hollow substrates.
- Flat head for quick manual installation without a setting tool
- Can be post-installed through fixture in some cases. (Consult technical advisory service)
- Possibility of removal when used with internally threaded socket
Product information
Size |
Product Code |
Anchor |
Fixture |
|||||
Diameter |
Length |
Max. thickness tfix for: |
Hole diameter |
Max. thickness tfix for: |
||||
d |
L |
hnom, 6d |
hnom, 12d |
df |
hnom,min |
hnom, 12d |
||
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
||
M12 |
R-STUDS-12150-HDFL |
12 |
150 |
63 |
- |
14 |
55 |
- |
M16 |
R-STUDS-16190-HDFL |
16 |
190 |
75 |
- |
18 |
71 |
- |
R-STUDS-16240-HDFL |
16 |
240 |
125 |
29 |
18 |
121 |
29 |
|
R-STUDS-16270-HDFL |
16 |
270 |
155 |
59 |
18 |
151 |
59 |
|
R-STUDS-16290-HDFL |
16 |
290 |
175 |
79 |
18 |
171 |
79 |
|
R-STUDS-16320-HDFL |
16 |
320 |
205 |
109 |
18 |
201 |
109 |
|
R-STUDS-16370-HDFL |
16 |
370 |
255 |
159 |
18 |
251 |
159 |
|
M20 |
R-STUDS-20260-HDFL |
20 |
260 |
117 |
- |
22 |
117 |
- |
R-STUDS-20300-HDFL |
20 |
300 |
157 |
37 |
22 |
157 |
37 |
|
Applications
- Fastening with bonded anchors
- Supports
- Barriers
- Racking systems
- Consoles
- Railings
- Window elements
- Scaffolding
- Heavy machinery
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Clean the hole thoroughly with hand pump and hole brush
- If required, insert the mesh sleeve into position
- Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product)
- Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached
- Leave undisturbed until curing time of resin has elapsed
- Attach fixture and tighten the nut to the required installation torque
